Peel & Stick Adhesive Cards for Proximity Card Personalization
Turn any clamshell or proximity card into a fully printed photo ID. Genuine Entrust peel & stick adhesive cards let you print your badge design on a standard direct-to-card printer, peel away the mylar backing, and bond the printed card directly onto technology cards that are too thick to run through a printer. Each pack contains 100 graphic-quality white PVC cards, ready to print and apply.
Why Choose Entrust Peel & Stick Cards
- Print on cards you can't feed — add photos, names, barcodes, and logos to clamshell proximity and access control cards without risking your printhead.
- Genuine Entrust quality — manufactured by Entrust Corporation for reliable feeding and consistent, high-quality image results.
- Easier feeding — the mylar liner adds rigidity and thickness compared to paper-backed adhesive cards, helping the card feed smoothly through direct-to-card printers.
- Standard CR80 size — same length and width as a credit card, so the printed overlay aligns flush with standard proximity cards.
How It Works
Print your ID design on the white PVC surface using a direct-to-card printer. Peel the mylar release liner to expose the permanent adhesive, then press the printed card onto your proximity or technology card. If your access cards are pre-slotted, punch the slot in the adhesive card after printing to protect your printhead.
Specifications
- Card size: CR80 — 3.375 in × 2.125 in (85.6 mm × 54 mm)
- Material: 100% PVC, graphic quality, white
- Thickness: 10 mil printable card; approx. 25 mil with mylar liner (CR80/25)
- Backing: peel-off mylar adhesive liner
- Quantity: 100 cards per pack
- Part number: 597640-001
Compatible Printers
Designed for Entrust (Datacard) direct-to-card printers and suitable for most direct-to-card ID card printers. Not recommended for retransfer (reverse-transfer) printers. Because the card is thinner than a standard 30 mil card, confirm your printer's supported card thickness range before ordering.
Shop our full range of blank PVC cards and Entrust printer ribbons and supplies, or contact the Ahearn & Soper team for help matching supplies to your card printer.
